Since Juang (2005) has found that the sludge settleability became much worse and the flocs displayed as pin flocs in only a few days after the addition of synthetic polymer was halted, it is hypothesized that the shift of microbial population in activated sludge before and after the addition of synthetic polymer might have occurred. Therefore, the identification of microbial population in the activated sludge of a lab-scaled continuous-flow type of treatment reactor was conducted at different phases of this study. The results of this study showed that the presence of synthetic polymer inhibited the growth of dominant bacteria and floc-formers in activated sludge, but gave a competitive advantage of growth to some other bacteria. The addition of synthetic polymer has caused the shift of microbial population and affected the growth of floc-formers in activated sludge. It took more than one month for the population structure of predominant microorganisms in activated sludge to return more closely to the initial population structure.
Clesceri L.S., Greenberg A.E., Eaton, A.D., (2001). Standard methods for the examination of water and wastewater. American Public Health Association (APHA), American Water Works Association (AWWA) and Water Environment Federation (WEF), USA.,
2.
Horan, N.J., Eccles, C.R., (1986). Purification and characterization of extracellular polysaccharide from activated sludge. Water Res., 20 (11), 1427-1432 (6 Pages), DOI: 10.1016/0043-1354(86)90142-9. Abstract | Full Text (592 K)
3.
Juang, D.F., (2005). Effects of synthetic polymer on the
filamentous bacteria in activated sludge, Biores. Technol., 96, 31-40 (10 Pages)
4.
Juang, D.F., Morgan, J.M., (2001). The applicability of the API 20E and API Rapid NFT systems for the identification
of bacteria from activated sludge, Elec. J. Biotechn., 4 (1), 1-7 (7 Pages)Abstract
5.
Liu, Y., Zhang, T. and Fang, H.H.P., (2005). Microbial community analysis and performance of a phosphateremoving activated sludge. Biores. Technol., 96 (11), 1205-1214 (10 Pages)Abstract | Full Text (950 K)
6.
Nielsen, A.T., Liu, W.T., Philips, C., Grady, L. Jr., Molin, S.,
Stahl, D.A., (1999). Identification of a novel group of bacteria in sludge from a deteriorated biological phosphorus
removal process. Appl. Environ. Microbiol., 65 (3), 1251-1258 (8 Pages)Abstract
Seka, A.M., Van de Wiele, T., Verstraete W., (2001). Feasibility of a multi-component additive for efficient control of activated sludge filamentous bulking. Water Res., 35 (12), 2995-3003 (9 Pages)Abstract
9.
Seviour, R.J., Blackall, L.L., (1999). The microbiology of activated sludge. Kluwer Academic Publishers, USA., Abstract
10.
Snaidr, J., Amann, R., Huber, I., Ludwig, W. and Schleifer, K.H., (1997). Phylogenetic analysis and situ identification
of bacteria in activated sludge. Appl. Environ. Micro., 63 (7), 2884-2896 (13 Pages)Abstract