• Home
  • Browse
    • Current Issue
    • Browse Issues
    • Browse Subjects
    • Browse Keywords
    • Browse Authors
  • Submit Paper
  • Journal Info
    • Editorial Board
    • Editorial Staff
    • Peer Review Process
    • Related Links
    • Facts & Figures
  • Guide for Authors
  • Contact Us
  • Register
  • Login

Advanced Search
Reduce Font Increase Font
Home Articles Article Details
Print
  • Recommend Journal Recommend
  • |
  • Alert E-Alert
  • |
  • Order JournalOrder Journal
  • |
  • Track Your ArticleTrack your article
    Abstracting/Indexing   
      p-ISSN: 1735-1472
    
e-ISSN: 1735-2630
    
    (In Press)
Volume 10 (2013)
Volume 9 (2012)
Volume 8 (2011)
Volume 7 (2010)
Volume 6 (2009)
Volume 5 (2008)
Volume 4 (2007)
Volume 3 (2006)
Volume 2 (2005)
Volume 1 (2004)
Evaluation of twenty four new Gossypium hirsutum strains for growth, yield, fibre quality and ClCuV resistance under environment of Punjab, Pakistan
Article 4: Volume 2, Number 4, Winter 2005, Pages 319-326 (8) XML PDF (199 K)
Authors
M. Hassan; M. A. Haq; M. Aslam; M. Saleem; K. P. Akhtar; S. Sarwar Alam
Abstract
Twenty four new strains were tested for their yield, quality and Leaf Curl Virus (ClCuV) resistance. NIAB-111/S, NIAB-98 and NIAB-999 were significantly high fruit bearing varieties at 90 days completing 59.54, 48.26 and 46.00% fruiting respectively. Seed cotton yield of VH-142 was highest with 5417 kgha-1 and 52 per plant boll bearing, DNH-57 and NIAB-999 remained second and third with 5234 and 5095 kg ha-1 seed cotton yield, respectively. BH-160 and CRIS-467 were found to be second and third highest boll bearing varieties with 50.97 and 40.20 per plant average bolls respectively. Plant height in CRIS-467, MNH-642 and SLH-224 was significantly higher in comparison to other varieties.NIAB-98, CIM-499 and CIM-506 were found short stature varieties in comparison with other but out of these NIAB-98 and CIM-506 were in high yielding position and CIM-499 was found medium yielder variety. GOT% of MNH-642 remained highest having value of 45.00%. While GOT%. of NIBGE-1, CRIS-168 and CRIS-467 was at lowest position with 35.73, 35.89 and 36.62% respectively. NIAB-111, CIM-499 and BH-160 were at first position in terms of fibre fineness with micronaire values 3.98, 4.00 and 4.07 ?g/inch having fibre length 28.53, 31.38 and 30.23 mm respectively. Out of 26 varieties, 16 varieties resulted maturity index in the range of 85.03% and 90.30% with highest maturity index in case of NIBGE-1 (i.e. 90.30%) followed by NIAB-999 and MNH-642 with 89.55 and 85.5% respectively.CRIS-168, CRIS-468 and CRIS-467 were found viral susceptible.
Keywords
Cotton; Gossypium hirsutum; Growth; Quality; Resistance; Yield
Main Subjects
Gossypium; Leaf Curl Virus; Cotton; Gossypium hirsutum; Punjab; Pakistan;
Related Articles in IJEST Publication by Main Subject
  • A comparative study on energy balance and economical indices in irrigated and dry land barley production systems
  • A comparison of metallic contents in lichen Pyxine subcinerea, its substratum and soil
  • A comparison of nearby incremental ground level and in plant concentrations of air pollutants emitted from electronics facilities
  • A critical review on waste paper sorting techniques
  • A multi-criteria decision-making approach for evaluating carbon performance of suppliers in the electronics industry
  • A novel adsorbent for heavy metal remediation in aqueous environments
  • A novel approach to separation of waste printed circuit boards using dimethyl sulfoxide
  • A predictive model for the formation potential of dichloroacetamide, a nitrogenous disinfection by-product formed during chlorination
  • A safety type genetically engineered bacterium with red fluorescence which can be used to degrade organophosphorus pesticides
  • A safety type genetically engineered bacterium with red fluorescence which can be used to degrade organophosphorus pesticides
  • A site-specific study on the measurement of sorption coefficients for radionuclides
  • A study of the applicability of various activated persulfate processes for the treatment of 2,4-dichlorophenoxyacetic acid
  • A study of water-soluble inorganic ions in size-segregated aerosols in atmospheric pollution episode
  • A study on contaminant migration of sugarcane effluent through porous soil medium
  • A wastewater treatment using a biofilm airlift suspension reactor with biomass attached to supports: a numerical model
  • A zinc oxide-coated nanoporous carbon adsorbent for lead removal from water: Optimization, equilibrium modeling, and kinetics studies
  • Adaptation of climate variability/extreme in arid environment of the Arabian peninsula by rainwater harvesting and management
  • Adsorption isotherms, kinetics and mechanism for the adsorption of cationic and anionic dyes onto carbonaceous particles prepared from Juglans regia shell biomass
  • Adsorption kinetics of herbicide paraquat in aqueous solution onto a low-cost adsorbent, swine-manure-derived biochar
  • Adsorption of bisphenol A on lignin: effects of solution chemistry
  • Adsorption of cadmium ion using a new composite cation-exchanger polyaniline Sn(IV) silicate: kinetics, thermodynamic and isotherm studies
  • Adsorption of chromium and copper in aqueous solutions using tea residue
  • Adsorption of hexavalent chromium from aqueous solutions by wheat bran
  • Adsorption of lead, zinc and cadmium ions from contaminated water onto Peganum harmala seeds as biosorbent
  • Adsorption of reactive dyes from aqueous solutions by tannery sludge developed activated carbon: Kinetic and equilibrium studies
  • Adsorption of roxarsone by iron (hydr)oxide-modified multiwalled carbon nanotubes from aqueous solution and its mechanisms
  • Adsorption study on municipal solid waste leachate using Moringa oleifera seed
  • Alteration of macroinvertebrate community in tropical aquatic systems in relation to sediment redox potential and overlaying water quality
  • Alternative refrigerants in vapour compression refrigeration cycle for sustainable environment: a review of recent research
  • American oyster (Crassostrea virginica) and sediments as a coastal zone pollution monitor by heavy metals
  • An appropriate multiple criteria decision making method for solving electricity planning problems, addressing sustainability issue
  • An environmental assessment of forest stands damages caused by excavators during road construction in Beech forests
  • An intuitionistic fuzzy Choquet integral operator based methodology for environmental criteria integrated supplier evaluation process
  • Anaerobic co-digestion of sanitary wastewater and kitchen solid waste for biogas and fertilizer production under ambient temperature: waste generated from condominium house
  • Analysis of long-term ozone trend over Delhi and its meteorological adjustment
  • Anoxygenic phototrophic bacterial diversity within wastewater stabilization plant during ‘red water’ phenomenon
  • Antibiotic resistance and genetic diversity in water-borne Enterobacteriaceae isolates from recreational and drinking water sources
  • Application of capacitive deionization technology to the removal of sodium chloride from aqueous solutions
  • Application of chitin and zeolite adsorbents for treatment of low level radioactive liquid wastes
  • Application of dried plant biomass as novel low-cost adsorbent for removal of cadmium from aqueous solution
  • Application of modified qualitative index for surveillance of water-filtration process in turbidity removal by different media
  • Application of the Haug model for process design of petroleum hydrocarbon-contaminated soil bioremediation by composting process
  • Application of waterworks sludge in wastewater treatment plants
  • Arsenic in soil and vegetation of a contaminated area
  • Arsenite removal from water by electro-coagulation on zinc–zinc and copper–copper electrodes
  • Assessing nitrate origin in a volcanic aquifer using a dual isotope approach
  • Assessment of a conceptual hydrological model and artificial neural networks for daily outflows forecasting
  • Assessment of airborne bacteria and fungi in an indoor and outdoor environment
  • Assessment of heavy metal pollution in surface water
  • Assessment of heavy metal pollution in the urban stream sediments and its tributaries
  • Assessment of heavy metals in sediment and in suspended particles affected by multiple anthropogenic contributions in harbours
  • Assessment of ozone effects on five varieties of tobacco via fumigation method
  • Assessment of seasonal variations of chemical characteristics in surface water using multivariate statistical methods
  • Assessment of seawater mixing in a coastal aquifer by high resolution electrical resistivity tomography
  • Assessment of variations in benzene concentration produced from vehicles and gas stations in Tehran using GIS
  • Assessment of Zn, Cu, Pb and Ni contamination in wetland soils and plants in the lake basin
  • Association of trace metals with various sedimentary phases in dam reservoirs
  • Atmospheric emission inventory of cadmium from anthropogenic sources
  • Atmospheric emission inventory of cadmium from anthropogenic sources
  • Behavior of major and minor elements in a temperate river estuary to the coastal sea
  • Bioaccumulation of heavy metals in some fauna and flora
  • Biodegradation of cypermethrin by a newly isolated actinomycetes HU-S-01 from wastewater sludge
  • Biodegradation of Cypermethrin by pseudomonas in a batch activated sludge process
  • Biodegradation of palmarosa oil (green oil) by Serratia marcescens
  • Biodegradation of starch blended polyvinyl chloride films by isolated Phanerochaete chrysosporium PV1
  • Biological nitrate removal from water resources
  • Biomonitoring of trace element accumulation in plants growing at Murat Mountain
  • Bioremediation of dry olive-mill residue removes inhibition of growth induced by this waste in tomato plants
  • Biosorption of Cu(II) and Pb(II) from aqueous solutions by chemically modified spent coffee grains
  • Biosorption of lead from acid solution using chitosan as a supporting material for spore forming-fungal biomass encapsulation
  • Biosorption of methylene blue from aqueous solutions by Typha angustata phytomass
  • Biosorptive behaviour of mango leaf powder and rice husk for arsenic(III) from aqueous solutions
  • Biotransformation potential of hexavalent chromium by Bacillus pumilus-S4, Pseudomonas doudoroffii-S5 and Exiguobacterium-S8 in association with hydrophytes
  • Carbon monoxide prediction using novel intelligent network
  • Caspian Sea level prediction using satellite altimetry by artificial neural networks
  • Catalytic nonthermal plasma reactor for the abatement of low concentrations of benzene
  • Characterization and photocatalytic activities of nanosized titanium dioxide thin films
  • Characterization of bioflocculants produced by bacteria isolated from crude petroleum oil
  • Characterization of microbial communities in a granular activated carbon–sand dual media filter for drinking water treatment
  • Characterization of PM2.5 by X-ray diffraction and scanning electron microscopy–energy dispersive spectrometer: its relation with different pollution sources
  • Chemical compatibility testing of the entomopathogenic fungus Lecanicillium muscarium to control Bemisia tabaci in glasshouse environment
  • Chemical oxidation of N,N-diethyl-m-toluamide by sulfate radical-based oxidation: kinetics and mechanism of degradation
  • Chemical speciation of fine particle bound trace metals
  • Chlorinated volatile organic compounds found near the water surface of heavily polluted rivers
  • Co-contamination of water with chlorinated hydrocarbons and heavy metals: challenges and current bioremediation strategies
  • Coagulant proteins identified in Mustard: a potential water treatment agent
  • Color removal from industrial wastewater with a novel coagulant flocculant formulation
  • Commercial steel wool for reduction of hexavalent chromium in wastewater: batch kinetic studies and rate model
  • Comparative evaluation of EDTA, pyridine and acetic acid for the assessment of available heavy metals from domestic and industrial sludges
  • Comparative plant growth promoting traits and distribution of rhizobacteria associated with heavy metals in contaminated soils
  • Comparison of metal(loid) concentrations in water, sediments and fish from two large shallow lakes
  • Comparison of response of moss, lichens and attic dust to geology and atmospheric pollution from copper mine
  • Comparison of response of moss, lichens and attic dust to geology and atmospheric pollution from copper mine
  • Comparison of response of moss, lichens and attic dust to geology and atmospheric pollution from copper mine
  • Comparison of styrene removal in air by positive and negative DC corona discharges
  • Computer simulated versus observed NO2 and SO2 emitted from elevated point source complex
  • Conceptual hydrosalinity model for prediction of salt load from wastewater flows into soil and ground water
  • Construction of green fluorescent protein based bacterial biosensor for heavy metal remediation
  • Contamination and impacts of new antifouling biocide Irgarol-1051 on subtropical coral reef waters
  • Contribution of bacteria to redox potential (Eh) measurements in sediments
  • Control of the biofouling bryozoan, Plumatella repens, using pulsed chlorine treatment
  • Copper, nickel and zinc contamination in soils within the precincts of mining and landfilling environments
  • Correlation between land-use change and greenhouse gas emissions in urban areas
  • Correlation between the chemical structure of biodiesel and its physical properties
  • Customer concerns about uncertainty and willingness to pay in leasing solar power systems
  • Decolorisation of exhausted reactive dye bath using ozonator for reuse
  • Decontamination of hexavalent chromium and tri-ethyl phosphate stimulants through photacatalytic oxidation
  • Degradation of native wheat straw lignin by Streptomyces viridosporus T7A
  • Degradation of polyvinyl alcohol in aqueous solutions using UV-365 nm/SOprocess
  • Degradation of trace aqueous 4-chloro-2-nitrophenol occurring in pharmaceutical industrial wastewater by ozone
  • Denitrification of nitrate contaminated groundwater using biodegradable snack ware as carbon source under a low temperature condition
  • Depth-wise distribution, mobility and naturally occurring glutathione based phytoaccumulation of cadmium and zinc in sewage-irrigated soil profiles
  • Desorption of tetracycline from montmorillonite by aluminum, calcium, and sodium: an indication of intercalation stability
  • Destroying hills in the northeastern part of Bangladesh: A qualitative assessment of extent of the problem and its probable impact
  • Determination of perchlorate and iodide concentrations in edible seaweeds
  • Determination of the optimum period for ciliated protozoa colonizing of an artificial substrate in a tropical aquatic ecosystem
  • Determination of the radiation dose due to radon ingestion and inhalation
  • Development of a master plan for industrial solid waste management
  • Development of industrial wastes disposal scenarios using life cycle assessment approach
  • Development of the models to estimate particulate matter from thermal infrared band of Landsat Enhanced Thematic Mapper
  • Development of the systematic object event data model for integrated point source pollution management
  • Diagnostic analysis of offensive odorants in a large municipal waste treatment plant in an urban area
  • Distribution of heavy metals in the core sediments of a tropical wetland system
  • Diversity of epiphytic lichens and their role in sequestration of atmospheric metals
  • Diversity of hydrolytic enzymes in haloarchaeal strains isolated from salt lake
  • Dynamic behavior modeling of cigarette smoke particles inside the car cabin with different ventilation scenarios
  • Dynamics of diesel fuel degradation in contaminated soil using organic wastes
  • Effect of aeration on steady-state conditions in non- and partially aerated low-loaded biofilter
  • Effect of aging on bioavailability of copper on the fluvo aquic soil
  • Effect of aluminum and chromium on the germination and growth of two Vigna species
  • Effect of biodiesel on particulate numbers and composition emitted from turbocharged diesel engine
  • Effect of cadmium supply levels to cadmium accumulation by Salix
  • Effect of co-existing plant specie on soil microbial activity under heavy metal stress
  • Effect of Extracellular polymeric substances on sludge reduction potential of Bacillus licheniformis
  • Effect of heavy metals and surfactants on the adsorption of phenolic compounds on sediment
  • Effect of irrigation with olive mill wastewater on soil hydraulic and solute transport properties
  • Effect of soil amendments on phytoextraction potential of Brassica juncea growing on sewage sludge
  • Effect of soil-applied calcium carbide and plant derivatives on nitrification inhibition and plant growth promotion
  • Effect of sulphur species on the hydrocarbon biodegradation of oil sludge generated by a gas processing facility
  • Effect of the injection of pure oxygen into a membrane bioreactor on the elimination of bisphenol A
  • Effect of trace metals on halophilic and mixed cultures in anaerobic treatment
  • Effect of vegetation on the performance of horizontal subsurface flow constructed wetlands with lightweight expanded clay aggregates
  • Effects of aeration rate and detention time on thermophilic aerobic digestion of mixed sludge and its dewaterability
  • Effects of climatic changes and anthropogenic activities on lake eutrophication in different ecoregions
  • Effects of heavy metals as stress factors on anaerobic digestion processes and biogas production from biomass
  • Effects of inhibitors on ferricyanide uptake and assimilation by plants
  • Effects of sludge pretreatment on sludge reduction in a lab-scale anaerobic/anoxic/oxic system treating domestic wastewater
  • Effects of soil types and forms of arsenical pesticide on rice growth and development
  • Efficient removal of hexavalent chromium from aqueous solutions using autohydrolyzed Scots Pine (Pinus Sylvestris) sawdust as adsorbent
  • Electrogenic capabilities of gram negative and gram positive bacteria in microbial fuel cell combined with biological wastewater treatment
  • Emissions of greenhouse and non-greenhouse air pollutants from fuel combustion in restaurant industry
  • Energy demand and economic consequences of transport policy
  • Enhanced electricity generation from whey wastewater using combinational cathodic electron acceptor in a two-chamber microbial fuel cell
  • Enumeration of Cryptosporidium spp and Giardia spp (oo)cysts in a tropical eutrophic lake: The municipal lake of Yaounde
  • Environmental evaluation of alternative chemicals to methyl bromide for fumigation of quarantine pests in transit
  • Environmental importance of rhamnolipid production from molasses as a carbon source
  • Environmental management of coastal regions in the Caspian Sea
  • Environmental monitoring of economically important invertebrate pests in Bramley apple orchards in Northern Ireland
  • Environmental risk management of urban growth poles regarding national importance
  • Estimation of atmospheric iodine emission from coal combustion
  • Estimation of bioavailability of polycyclic aromatic hydrocarbons in river sediments
  • European red spider mite - an environmental consequence of persistent chemical pesticide application
  • Evaluation of basin environmental vulnerability: the weighted method compared to the compromise method
  • Evaluation of benzene exposure in adults and urinary s-phenylmercapturic acid in children living in Adelaide, South Australia
  • Evaluation of impact of industrial effluents on intertidal sediments of a creek
  • Evaluation of land farming and chemico-biological stabilization for treatment of heavily contaminated sediments in a tropical environment
  • Evaluation of methane generation rate and potential from selected landfills in Malaysia
  • Evaluation of oxidative stress in Vigna radiata L. in response to chlorpyrifos.
  • Evaluation of the optimal performance of passenger vehicle by integrated energy-environment-economic modeling
  • Evaluation of the performance of a new freeze desalination technology
  • Evaluation of trace element availability from secondary metallurgical slag generated in steelmaking by sequential chemical extraction
  • Evans blue removal from wastewater by rarasaponin–bentonite
  • Experimental and analytical model studies on leachate volume computation from solid waste
  • Exposure to ionising radiations arising from the operation of nuclear installations and cancer mortality
  • Feasibility of red mud neutralization with seawater using Taguchi’s methodology
  • Feasibility study of crystallization process for water softening in a pellet reactor
  • Floating wetland mesocosm assessment of nutrient removal to reduce ecotoxicity in stormwater ponds
  • Flow and high sediment yield from the Huangfuchuan watershed
  • Formulation, application and evaluation of a stack emission model for coal-based power stations
  • Freshwater ostracods as environmental tracers
  • Gaseous Emission Comparison of a Compression-Ignition Engine Fueled with Different Biodiesels
  • Genotype and environment interaction effect on yield of cotton under naturally salt stress condition
  • Genotypic and environmental interaction in advanced lines of rice under salt-affected soils of Punjab
  • Genotypic and environmental interaction in advanced lines of wheat under salt-affected soils environment of Punjab
  • Geochemistry of heavy metals and sedimentation rate in a bay adjacent to the Caspian Sea
  • Geostatistical evaluation of lead and zinc concentration in soils of an old mining area with complex land management
  • Germination and growth of six plant species on contaminated soil with spent oil
  • Germination and seedling growth of corn (Zea mays l.) under varying levels of copper and zinc
  • Heavy metal chemical fractionation and immobilization in lightweight aggregates produced from mining and industrial waste
  • Heavy metal distribution in soil and plant in municipal solid waste compost amended plots
  • Heavy metal fractionation in roof run off in Ile-Ife, Nigeria
  • Heavy metals contamination in water and sediments of an urban river in a developing country
  • Heavy metals pollution in the soils of suburban areas in big cities: a case study
  • Heavy metals removal from synthetic wastewater by a novel nano-size composite adsorbent
  • Hexamine adsorption study on activated carbon from aqueous solutions for application in treatment of hexamine industrial wastewater
  • Hexavalent chromium removal from aqueous solutions by using low-cost biological wastes: equilibrium and kinetic studies
  • High lipid content and productivity of microalgae cultivating under elevated carbon dioxide
  • High rate anaerobic treatment of Sago wastewater using HUASB with PUF as carrier
  • High-resolution profiles of iron, manganese, cobalt, cadmium, copper and zinc in the pore water of estuarine sediment
  • Households’ perceptions of private sector municipal solid waste management services: A binary choice analysis
  • Hydrocarbon contamination of a typical mangrove floor in Niger Delta, Nigeria
  • Hydrogeochemical parameters for assessment of groundwater quality in a river sub-basin
  • Identification of hydrogeochemical process linked to marine intrusion induced by pumping of a semiconfined mediterranean coastal aquifer
  • Identification of potential soil adsorbent for the removal of hazardous metals from aqueous phase
  • Identification of waste management development drivers and potential emerging waste treatment technologies
  • Immobilization of lead by a vermicompost and its effect on white bean (Vigna Sinenis var. Apure) uptake
  • Impact assessment of anthropogenic activities on air quality, using lichen Remototrachyna awasthii as biomonitor
  • Impact Factors Use and Abuse
  • Impact of control structures on assimilative capacity of rivers and fish habitat
  • Impact of discharge wastewater effluents on the physico-chemical qualities of a receiving watershed in a typical rural community
  • Impacts of soil acidity on qualitative and quantitative conditions of broadleaf and coniferous trees
  • Implementation of green management concepts in sport complexes
  • Implications of chloride enhanced cadmium uptake in saline agriculture: modeling cadmium uptake by maize and tobacco
  • Influence of biotic-abiotic factors on the degradation of novaluron in tropical soil
  • Influence of insecticides alone and in combination with fungicides on enzyme activities in soils
  • Influences of rural industries on sustainable social and environmental developments
  • Inhibition effect of green alga on cyanobacteria by the interspecies interactions
  • Inorganic arsenic sorption by drinking-water treatment residual-amended sandy soil: effect of soil solution chemistry
  • Insight into adsorption equilibrium, kinetics and thermodynamics of lead onto alluvial soil
  • Integrated assessment of nonpoint source pollution of a drinking water reservoir in a typical acid rain region
  • Interactions between algicidal bacteria and the cyanobacterium Microcystis aeruginosa: lytic characteristics and physiological responses in the cyanobacteria
  • Investigating the chemical stabilization of hazardous waste material (fly ash) encapsulated in Portland cement
  • Investigation of heat pipe heat exchanger effectiveness and energy saving in air conditioning systems using silver nanofluid
  • Investigation of lake drying attributed to climate change
  • Investigations on different positions of electrodes and their effects on the distribution of Cr at the water sediment interface
  • Isolation and application of a wild strain photosynthetic bacterium to environmental waste management
  • Isolation and characterization of some polycyclic aromatic hydrocarbon degrading bacteria from Nsukka soils in Nigeria
  • Isolation and identification of cadmium- and lead-resistant lactic acid bacteria for application as metal removing probiotic
  • Isolation of hydrocarbonoclastic bacteria from bilge oil contaminated water
  • Isotherms for the sorption of zinc and copper onto kaolinite: comparison of various error functions
  • Key uncertainty sources analysis of water quality model using the first order error method
  • Kinetic interpretation on mercury oxidation and transformation in simulated flue gases
  • Kinetic mechanism of competitive adsorption of disperse dye and anionic dye on fly ash
  • Kinetic modeling of carbon and nutrients removal in an integrated rotating biological contactor-activated sludge system
  • Kinetic of biogenic sulfide production for microbial consortia isolated from soils with different bioaccessible concentrations of lead
  • Kinetics of biodegradation of diesel fuel by enriched microbial consortia from polluted soils
  • Kinetics of urease mediated calcite precipitation and permeability reduction of porous media evidenced by magnetic resonance imaging
  • Land assessment for flood spreading site selection using geospatial information system
  • Lead remediation of contaminated water using Moringa Stenopetala and Moringa oleifera seed powder
  • Leaf dipping as an environmental screening measure to test chemical efficacy against Bemisia tabaci on poinsettia plants
  • Levels of polycyclic aromatic hydrocarbons and polychlorinated biphenyls in sediment of bitumen deposit impacted area
  • Levels, seasonal variations, and health risks assessment of ambient air pollutants in the residential areas
  • Life cycle assessment of pyrolysis–gasification as an emerging municipal solid waste treatment technology
  • Life cycle assessment of small-scale constructed wetland and extended aeration activated sludge wastewater treatment system
  • Lung cancer risk associated with residential proximity to industrial installations: a spatial analysis
  • Mapping spatial disparity of canal water distribution under irrigated cropping environment using satellite imageries
  • Mathematical models to predict soil heavy metal toxicity in the 2012 Olympic Site
  • Metal concentration and particle size distribution of stream and river water polluted from copper rolling mill industry
  • Microbial community changes in contaminated soils in response to phenanthrene amendment
  • Microbial community dynamics in the two-stage anaerobic digestion process of two-phase olive mill residue
  • Modeling hydrothermal, suspended solids transport and residence time in a deep reservoir
  • Modeling of air stripping from volatile organic compounds in biological treatment processes
  • Modeling rhamnolipids production by Pseudomonas aeruginosa from immiscible carbon source in a batch system
  • Modelling runoff quantity and quality in tropical urban catchments using Storm Water Management Model
  • Molecular characterization of phenanthrene-degrading methanogenic communities in leachate-contaminated aquifer sediment
  • Monitoring of lake water quality along trophic gradient using landsat data
  • Municipal solid waste incineration fly ash sintered lightweight aggregates and kinetics model establishment
  • Natural environmental radioactivity and estimation of radiation exposure from saline soils
  • New chelating resin for preconcentration and determination of molybdenum by inductive couple plasma atomic emission spectroscopy
  • Nickel removal from electroplating waste water using stand-alone and electrically assisted ion exchange processes
  • Nitrate reductase activity: A solution to nitrate problems tested in free and Immobilized algal cells in presence of heavy metals
  • Nitrate removal from groundwater using solid-phase denitrification process without inoculating with external microorganisms
  • Non-segregated municipal solid waste in an open dumping ground: a potential contaminant in relation to environmental health
  • Numerical modeling of two-phase fluid flow and oil slick transport in estuarine water
  • Numerical simulation of deep convective cloud seeding using liquid carbon dioxide
  • Occurrence, physiological responses and toxicity of nickel in plants
  • Off-line solid-phase extraction procedure for the determination of polycyclic aromatic hydrocarbons from aqueous matrices
  • On-site treatment of textile yarn dyeing effluents using an integrated biological–chemical oxidation process
  • Optimization of aqueous methylparathion biodegradation by Fusarium sp in batch scale process using response surface methodology
  • Optimization of novel hyperthermostable B amylase production by Bacillus subtilis DJ5 using solid agroresidual substrates
  • Optimization of operational parameters on performance and emissions of a diesel engine using biodiesel
  • Optimization of parameters using response surface methodology and genetic algorithm for biological denitrification of wastewater
  • Optimized height of noise barrier for non-urban highway using artificial neural network
  • Optimizing post-mining land use for pit area in open-pit mining using fuzzy decision making method
  • Ozone trends in the vertical structure of Upper Troposphere and Lower stratosphere over the Indian monsoon region
  • Particle associated polycyclic aromatic hydrocarbons in the atmospheric environment of urban and suburban residential area
  • Particle size distribution and dissolution properties of metals in cyclone fly ash
  • Particle swarm optimization feedforward neural network for modeling runoff
  • Particulate matter source apportionment in Cairo: recent measurements and comparison with previous studies
  • Partitioning of major and trace inorganic contaminants in fly ash acid mine drainage derived solid residues
  • Performance analysis of Diesel engines fueled by biodiesel blends via thermodynamic simulation of an air-standard Diesel cycle
  • Performance of irrigation projects and their impacts on poverty reduction and its empowerment in arid environment
  • pH-dependent copper release in acid soils treated with crushed mussel shell
  • Phospholipid fatty acids analysis of the vertical distribution of microbial communities in eutrophic lake sediments
  • Photo induced dissociation of ferri and ferro cyanide in hydroponic solutions
  • Photocatalytic degradation of azo dye Orange II in aqueous solutions using copper-impregnated titania
  • Photodegradation of amaranth in aqueous solution catalyzed by immobilized nanoparticles of titanium dioxide
  • Phytoremediation of industrial wastewater potentiality by Typha domingensis
  • Pollutant association with suspended solids in stormwater in Tijuana, Mexico
  • Pollution of south of Tehran ground waters with heavy metals
  • Polycyclic aromatic hydrocarbons in Niger Delta soil: sources and profiles
  • Potential for improving vehicle fuel efficiency and reducing the environmental pollution via fuel ionization
  • Potential of natural bed soil in adsorption of heavy metals in industrial waste landfill
  • Practical estimation and distribution of diffuse pollutants arising from a watershed in Turkey
  • Precipitation of carbonates by bacteria isolated from wastewater samples collected in a conventional wastewater treatment plant
  • Predictability of bacterial activity and denitrification in aquatic sediments with continuous measurements of redox potential
  • Predicting lake water quality responses to load reduction: a three-dimensional modeling approach for total maximum daily load
  • Predicting solar radiation fluxes for solar energy system applications
  • Preliminary investigation of chloramphenicol in fish, water and sediment from freshwater aquaculture pond
  • Presence of fluoroquinolones and sulfonamides in urban sewage sludge and their degradation as a result of composting
  • Pretreatment of high strength waste emulsions by combined vibratory shear enhanced process with Fenton oxidation
  • Production of biosurfactant from Iranian oil fields by isolated Bacilli
  • Production of polyhydroxyalkanoates from Ralstonia eutropha using paddy straw as cheap substrate
  • Protection of biodiesel and oil from degradation by natural antioxidants of Egyptian Jatropha
  • Real-world emissions of gasoline passenger cars in Macao and their correlation with driving conditions
  • Recovery of chlorinated solvent trichloroethylene contaminated groundwater using a hybrid treatment system
  • Recycling of environmentally problematic plant wastes generated from greenhouse tomato crops through vermicomposting
  • Reduction of environmental pollution through optimization of energy use in cement industries
  • Removal of airborne hexavalent chromium mist using chitosan gel beads as a new control approach
  • Removal of airborne hexavalent chromium using alginate as a biosorbent
  • Removal of hazardous hexavalent chromium from aqueous solution using divinylbenzene copolymer resin
  • Removal of heavy metal ions from aqueous solutions with multi-walled carbon nanotubes: Kinetic and thermodynamic studies
  • Removal of heavy metals from a contaminated soil using organic chelating acids
  • Removal of humic acid from peat water using untreated powdered eggshell as a low cost adsorbent
  • Removal of lead from cathode ray tube funnel glass by chloride volatilization
  • Removal of nitrates from high-salinity wastewaters from desulphurization process with denitrifying bacteria encapsulated in Lentikats Biocatalyst
  • Removal of surfactant from industrial wastewaters by coagulation flocculation process
  • Response of wheat plants to sodium and calcium ion interaction under saline environment
  • Response surface methodology for lead biosorption on Aspergillus terreus
  • Response surface methodology mediated optimization of Remazol orange decolorization in plain distilled water by Pseudomonas aeruginosa BCH
  • Reuse of dewatered sewage sludge conditioned with skeleton builders as landfill cover material
  • Risk assessment of traffic-related air pollution in a world heritage city
  • Risk of water pollution due to ash-sludge mixtures: column trials
  • Sample preparation and analytical techniques for determination of polyaromatic hydrocarbons in soils
  • Saraca indica leaf powder for decontamination of Pb: removal, recovery, adsorbent characterization and equilibrium modeling
  • Seasonal distribution of cadmium among components of sewage treatment ponds: an eco-tech for heavy metal remediation
  • Seasonal variation in bacterial heavy metal biosorption in water samples from Eziama river near soap and brewery industries and the environmental health implications
  • Seismic human loss estimation for an earthquake disaster using neural network
  • Selection of wastewater treatment process based on the analytical hierarchy process and fuzzy analytical hierarchy process methods
  • Semivolatile organic compounds removal and health risk reduction in drinking water treatment biofilters applying different backwashing strategies
  • Separation of ternary sodium chloride/Reactive Black-5 aqueous solutions using two different modules in a nanofiltration pilot plant
  • Shoreline change rate estimation and its forecast: remote sensing, geographical information system and statistics-based approach
  • Short ingestion tests as alternative proposal for conventional range finding assays with Thamnocephalus platyurus and Brachionus calyciflorus
  • Simulation of global warming effect on outdoor thermal comfort conditions
  • Simulation of nitrate transport and wastewater seepage in groundwater flow system
  • Slow restoration of soil microbial functions in an Acacia plantation established on degraded land in Thailand
  • Small-scale watershed extended method for non-point source pollution estimation in part of the Three Gorges Reservoir Region
  • Sorption characteristics and mechanisms of ammonium by coal by-products: slag, honeycomb-cinder and coal gangue
  • Sorption of heavy metals from aqueous solution by dehydrated powders of aquatic plants
  • Sorption of lead by chemically modified rice bran
  • Source identification of polycyclic aromatic hydrocarbons in sediments of a creek around a flow station
  • Sources of contaminants and groundwater quality in the coastal part of a river delta
  • Specific detection of bioavailable phenanthrene and mercury by bacterium reporters in the red soil
  • Specific methanogenic activity of halophilic and mixed cultures in saline wastewater
  • Start-up of halophilic nitrogen removal via nitrite from hypersaline wastewater by estuarine sediments in sequencing batch reactor
  • Studies on the recovery of uranium from nuclear industrial effluent using nanoporous silica adsorbent
  • Study on identification of leather industry wastewater constituents and its photocatalytic treatment
  • Substrate inhibition kinetics of phenol degradation by Pseudomonas fluorescence from steady state and wash-out data
  • Suppressive biomasses and antagonist bacteria for an eco-compatible control of Verticillium dahliae on nursery-grown olive plants
  • Surfactants enhanced recovery of endosulfan from contaminated soils
  • Survey efficiency of electrocoagulation on nitrate removal from aqueous solution
  • Synergistic degradation of diazo dye Direct Red 5B by Portulaca grandiflora and Pseudomonas putida
  • Synthetic vegetation: An ecosystem prosthesis
  • Systematic assessment of electrocoagulation for the treatment of marble processing wastewater
  • Techniques for environmental monitoring of predatory fauna on branches of Bramley apple trees in Northern Ireland
  • Temporal variation in the arsenic and metal accumulation in the maritime pine tree grown on contaminated soils
  • The effects of wastewater reuse on potato growth properties under greenhouse lysimeteric condition
  • The relevance of bisphenol A adsorption during Fenton’s oxidation
  • The separation mechanism and application of a tapered diameter separation bed
  • The use of environmental markers to identify groundwater salinization sources in a Neogene basin, Kert aquifer case, NE Morocco
  • Theoretical and experimental aspects of saving energy in fans
  • Time lapse chemical fertilizer monitoring in agriculture sandy soil
  • Toxicity of methyl parathion on growth and reproduction of three ecologically different tropical earthworms
  • Toxicity of the organophosphate pesticide diazinon to crayfish of differing age
  • Toxicity, biochemical and clastogenic response of chlorpyrifos and carbendazim in milkfish Chanos chanos
  • Trace Metal Levels in Edible-Wild Fungi Growing in Bolu, Turkey
  • Transformation of metal speciation in purple soil as affected by waterlogging
  • Treatment of diesel-polluted clay soil employing combined biostimulation in microcosms
  • Treatment of poultry slaughterhouse wastewater in upflow anaerobic filter under low upflow velocity
  • Treatment of vegetable oil mill effluent using crab shell chitosan as adsorbent
  • Treatment options for wastewater effluents from pharmaceutical companies
  • Understanding pH effects on trichloroethylene and perchloroethylene adsorption to iron in permeable reactive barriers for groundwater remediation
  • Urban wastes to remediate industrial sites: a case of polycyclic aromatic hydrocarbons contamination and a new process
  • Use of environmental friendly fertilizers in saline and saline sodic soils
  • Use of geospatial information system based tool for renovation and rehabilitation of water distribution systems
  • Use of hydrological methods for assessment of environmental flow in a river reach
  • Use of Pyracantha coccinea Roem. as a possible biomonitor for the selected heavy metals
  • Using Bayesian belief networks to support health risk assessment for sewer workers
  • Using different amendments to reduce heavy metals movement in soils
  • Using the VIKOR method to evaluate the design of a water quality monitoring network in a watershed
  • Utilization multi attribute decision making models for spatial prioritization and environmental decision making in new towns
  • Utilization of constructional lime as heterogeneous catalyst in biodiesel production from waste frying oil
  • Utilization of palm oil mill effluent for polyhydroxyalkanoate production and nutrient removal using statistical design
  • Validation and field application of tailor-made nitrogen dioxide passive samplers
  • Varietals differences in agronomic performance of six wheat varieties grown under saline field environment
  • Volatile organic compounds decomposition using nonthermal plasma coupled with a combination of catalysts
  • Water equivalent method for city phytostructure of Indonesia
  • Water quality index and fractal dimension analysis of water parameters
  • Water quality index of the ground water of bitumen deposit impacted farm settlements using entropy weighted method
  • Water quality parameters along rivers
  • Whey as a substrate for generation of bioelectricity in microbial fuel cell using E.coli
  • Willingness to pay for improved residential waste management in a developing country
  • Zero-valent iron/persulfate(Fe0/PS) oxidation acetaminophen in water
References
1. Abdul-Razzaq, S., (2000). Assessment of Gossypium hirsutum F1 against commercial varieties. Pak. J. Sci. Ind. Res., 43 (3), 184-187 (4 Pages)
2. Afiah, S.; Ghoneim, E. M., (1999). Evaluation of some Egyptian cotton (Gossypium barbadense L.) varieties under desert conditions. Ann. Agr. Sci. Cairo., 44 (1), 201-211 (11 Pages) Abstract
3. Afzal, M., (1949). Growth and development of cotton plant and its improvement in the punjab. Govt. Printing Press.,
4. Baloch, E., (1997). Environmental adaptation analysis of several upland cotton varieties. Pak. J. Sci. & Ind. Res., 41 (5-12), 91-94 (4 Pages)
5. Bozhinov, M., (1998). Growth and development of Bulgarian and foreign cotton varieties. Rasteniev dni-nauki., 35 (3), 384-388 (5 Pages) Abstract
6. Eco. Survey of Pak., (2003-2004). Performance of some wide crosses in Gossypium New Mex Agri Exp Sta Bull. Isd:12-13 Fryxell P. A., Staten G., Porter J. H. 1958.
7. Hawkins, B. S.; Peacock, H. A.; Ballard, W. W., (1965). Heterosis and combining ability in upland cotton; Effect on yield. Crop Sci., 5, 543-546 (4 Pages) Abstract
8. International study of cotton varieties in southern cone Anais II Congresso Brasileiro de Algodao,. , 582-584 (3 Pages)
9. Ji, C.; Yu, J.; Liu, Y. L.; Wu, Y.; Ji, C. L.; Yu, J.; Liu, Y. L.; Wu, Y., (2000). Characteristics of yield constitution of high-yielding cotton varieties. Jiangsu. J. Agr. Sci., 16 (1), 25-30 (6 Pages)
10. Kalsy, H. S.; Garg, H. R., (1989). Heterosis in intervarietal crosses of upland cotton (Gossypium hirsutum L). J. Ind. Sac. Cotton Impmv., 2, 159-162 (4 Pages)
11. Keim, D. L.; Burdett, L.; Jones, K. R.; Dugger, P.; Richter, D., (2000). Yield progress in delta pine conventional varieties grown in the Midsouth. Proceedings Beltwide cotton conferences, San Antonio, USA, 1, 545-547 (3 Pages)
12. Marani, A., (1967). Heterosis and combining ability in intraspe-cific and inter-specific crosses of cotton. Crop. Sci., 7, 519-522 (4 Pages) Abstract
13. Mirza, M. Y. and Chaudhry, M. R., (1985). Identification of parents for use in hybrid cotton programs in Pakistan. The Pak. Cottons., 29 (2), 63-75 (13 Pages)
14. Mohammad, J. B., (2001). Stability and adaptability analysis of some quantitative traits in upland cotton varieties. Pak. J. Sci. & Ind. Res., 44 (2), 105-108 (4 Pages)
15. Moser, H. S. et all., (2000). Performance of transgenic cotton varieties in Arizona. Proceedings of Beltwide cotton conferences, San Antonio, USA, 1, 497-499 (3 Pages) Abstract
16. Rafique, M., (1972). Heterosis studies in G. hirsutum L crosses. M. Sc thesis, WPAU, Lyallpur. Steel, R. G.,D. and J. H. Torrie., Principles and procedures of statistics Statistics.. McGraw Co. Inc., Singapore, , 172-177 (6 Pages)
17. Young, F. F.; Murray, J. C., (1966). Heterosis and inbreeding depression in diploid and tetraploid cotton. Crop. Science., 6, 436-437 (2 Pages) Abstract

Home | About Us | Sitemap | News | Glossary | Privacy Policy | Help | Contact Us

© 2004 - 2013 IAU. All rights reserved.

Top of Page